• Skip to primary navigation
  • Skip to main content

VRSUN

Hot Virtual Reality News

HOTTEST VR NEWS OF THE DAY

  • Home

brad lynch

Report: Apparent HTC Leak Reveals Slim & Modular VR Standalone

November 15, 2022 From roadtovr

HTC has been teasing its next VR headset over the last few weeks, showing off bits of the device at a time which the company promises will be “something big… we mean small.” Now it appears the design and some of the specs have been leaked, with the details gathered courtesy of VR analyst and YouTuber Brad Lynch.

Info surrounding the headset—still nameless at the time of this writing—was gathered by Lynch from sources “mostly in the supply chain,” he says. Lynch dubs the device the ‘Flowcus’ for its apparent coupling of the light and slim form-factor of Vive Flow and the standalone capabilities of Vive Focus.

Images of the headset featured in Lynch’s 10-minute video (embedded below) are said to be renderings based on images seen by Lynch, something he says was done to retain the anonymity of the leak’s source, as leaked images apparently contained identifying markers.

The headset is said to contain four B&W tracking cameras and one RGB camera for passthrough. Controllers are supposedly the same as the those supplied with Vive Focus 3.

Image courtesy Brad Lynch

The headset is also said to include a removable facial interface, which presumably would allow for easily cleaning. That profile view also illustrates the device’s slim and light design.

Image courtesy Brad Lynch

And that’s apparently achieved by pancake lenses, which are slowly becoming the industry standard for VR headsets, with Meta Quest Pro and Pico 4 also integrating them.

Lynch says the headset includes dual 1,920×1,920 LCDs, closed at up to 120hz. Mechanical IPD adjustments are also present, Lynch says.

Image courtesy Brad Lynch

Under that facial interface is also reportedly a USB-C port, which could be used for tacking on an eye-tracking module.

Image courtesy Brad Lynch

One of the unique bits about HTC’s alleged upcoming headset is its modularity; that port connection on the arm of the headstrap is supposed to allow the headset to go into a ‘glasses mode’ by allowing you to disconnect the headstrap/battery and use it more like a Vive Flow for casual viewing. Lynch alleges there’s also the possibility the USB-C port may be capable of connecting to a PC.

When in ‘glasses mode’, the arms are also said to fold up for easier storage, making Lynch’s ‘Flowcus’ moniker even more apt.

As a true standalone device, the headset is said to include a chipset “faster than the [Snapdragon XR2] in Quest 2,” Lynch says, also speculating it may be the upcoming Snapdragon XR2 Gen. 2, making it potentially the first such device to do so.

Provided this is the consumer-focused device it’s chalked up to be—and coming from the beleaguered HTC—we wouldn’t expect a low price putting it in competition with Quest 2 or Pico 4. You can check out Lynch’s 10-minute video at the below, which includes additional shots of the headset and more speculation of its supposed features.

Filed Under: brad lynch, htc, htc vive, htc vive flowcus, htc vive standalone, News, Standalone VR Headset

Allegedly Leaked Project Cambria Files Could Reveal Internal Design

June 2, 2022 From roadtovr

Meta is still pretty camera-shy when it comes to showing off Project Cambria, the company’s upcoming high-end VR headset which offers AR passthrough. It’s been intentionally blurred for its few on-screen demos, however now we may have just gotten a look under the hood.

YouTuber and tech analyst Brad Lynch (SadlyItsBradley) released a number of images in a post on his Patreon page which appear to be CAD files of Project Cambria.

Lynch previously released a render of an alleged production version of Cambria back in April, however he says some of those details were misinterpreted. With the leaked files, Lynch says there’s a few key items he’s noticed that are included in the upcoming headset that weren’t previously apparent.

“You may notice a wire on the right side of the device. In one of the pictures its sorta coiled/curved. This is the power delivery wire that connects the battery in the back of the head strap to the HMD up front. It seems that when you adjust the strap to the ‘closest point,’ it will coil automatically. And stretch to be straight when you adjust the opposite way,” Lynch says in the Patreon post.

Image courtesy Brad Lynch

Lynch notes that on the headset’s left side, a clip attached to the headstrap may be for the USB-C cable that is allegedly bundled with the device.

“This is very similar to how most PC VR HMDs include a plastic clip to run a tether around comfortable their devices. I am shocked they are including this, since I figured they would push the Oculus Air Link method rather than the Oculus (wired) Link method but there it is. Especially from the fact this device is almost certain to include Wifi-6E.”

In the image above you can also make out the adjustment knob for the headset’s strap.

Image courtesy Brad Lynch

Lynch also posits that a knob on the front of the headset is to dial-in lens distance from the face, or similar to how the comfort dial works on Valve Index.

He also alleges the IPD mechanism is set by “grabbing the lenses themselves and moving them,” as opposed to dialing them in with some sort of wheel mechanism. Unlike Quest 2, Lynch says it offers smooth adjustments between interpupillary distance (IPD) sizes for more precise user comfort.

Image courtesy Brad Lynch

And what sets Cambria apart from other headsets: Lynch alleges it has two “glacier” cameras on the front left and right, and one “teton” high resolution RGB Camera in the center, the latter of which is used to colorize the monochrome stereo glacier sensors.

Image courtesy Brad Lynch

A supposed infrared (IR) projector is also there—a small square sitting just above the centrally located RGB sensor—which is said to provide additional depth data for environmental mapping.

Lynch has spent considerable time over the past few months datamining with fellow VR cohorts Basti564 and Samulia to track down rumors and info. Although Lynch doesn’t reveal where this info came from, he maintains its a “large leak.”

Lynch has also included a prediction of specs based on those files and other obtained info. It’s said to feature:

  • 2,160 x 2,160 MiniLED Backlit LCD Panels (2)
  • Custom Pancake Lenses (2)
  • 16MP Color Camera for Color Passthrough
  • Eye + Face Tracking (IR Camera based)
  • Qualcomm XR2+ Gen 1 SoC
  • 12GB LPDDR5 RAM
  • 256GB SSD
  • WiFi 6E Support
  • ~5000 mAh battery

There’s still no precise launch information yet for Project Cambria, although Meta has gone one record saying it’s slated to be “significantly higher” than $800, making it targeted more squarely at developers and enthusiasts.

Filed Under: brad lynch, cambria, Meta, meta project cambria, News, project cambria, sadleyitsbradley, Standalone VR Headset, VR Headset

  • Home